DT06MINIATURE Needle type DIFFERENTIAL TEMPERATURE Sensor
| DT06 specifications: | |
| Sensitivity (nominal) | 40 10-6 V/K |
| Temperature range (total sensor including metal sheathed cable) | -55 - +450 °C |
| Temperature range (Teflon cable) | -55 - +260 °C |
| Heat flux output signal | analog microvolts |
| Power requirements | No power required |
| Optional | sensor length and diameter, extended cable, cables with alternative colour codes, extended temperature to 700 °C |
| Ordering code | DT06/L1/L2/L3/L4, L1 to L4 in mm |
| Standard | DT06/30/1000/100/2500 |
| Temperature sensor | Thermocouple K, ANSI MC96.1-1982 |
Figure 1 DT06 is used for high temperature applications up to 450 degrees C.
(1) sensor 1 (reference with temperature)
(2) spring loaded bolt (MF10x1)
(3) metal sheathed connection cable
(4) metal sheathed cable
(5) sensor 2
(6) tefon extension cable
Dimensions are in mm.
The DT06 needle type differential temperature sensor is used to perform continuous measurement of temperature differences as well as absolute temperatures. It is meant for general monitoring of industrial processes and in particular for detection of small thermal changes.
A nice clear print of the original product brochure.
Introduction
The DT06 has been designed for studies of the energy balance of industrial installations, in particular to monitor small changes within larger processes. In this application it can be useful to monitor temperature differences between one location and the next rather than absolute temperatures.
The main components are two matched thermocouple sensors, incorporated in a fully stainless steel needles. These sensors as well as their interconnecting wires can withstand temperatures up to 450 °C.
The extension cable is made of Teflon.
Sensor output consists of a heat flux signal (microvolt analog signal) and type K thermocouple. DT06 sensors can be manufactured in such a way that they are fully exchangeable, which is easy for servicing.
Options
- Depending on the application, amplifiers AC100 or NAM01 are used.
- Alternative designs: Hukseflux is specialised in heat flux sensor design. For different applications special models can be constructed.
- Optional: DT06 can be made in different diameters and lengths. Extended temperature to 700 °C. (no spring)
Suggested Use
- Studies of energy balance of industrial processes.