LP02-TRSOLAR RADIATION SENSOR COMPLIANT WITH ISO AND WMO STANDARDS, WITH INTEGRATED TRANSMITTER
| sensor specifications: | |
| For LP02 specifications, please consult LP02 brochure or manual | |
| Input | 7,2 to 35 VDC for transmitter |
| Output | Signal from transmitter (programmable), either amplified voltage, 4-20mA, 4-20mA with HART protocol, ... |
| Output specifications | please contact Hukseflux |
| Accuracy of output | dependant on used transmitter |
| Temperature dependence | dependant on used transmitter |
| Dimensions | DIN form B |
Hukseflux solar radiation sensor (pyranometer)
with integraded transmitter (tr)
Figure 1 LP02 solar radiation sensor with integrated
transmitter. All dimensions are in mm.
LP02 is a solar radiation sensor that can be applied for most common solar radiation observations. It complies with the latest ISO and WMO standards. The scientific name of this instrument is pyranometer. Model LP02-TR has a special housing, which makes it possible to place a transmitter, or amplifier. For additional information on the application and use of regular LP02 pyranometer, LP02 brochure and manual can be consulted.
A nice clear print of the original product brochure.
LP02 serves to measure the solar radiation flux that is incident on a plane surface in W/m2 from a 180 degrees field of view (also called “global” solar radiation). Working completely passive, using a thermopile sensor, LP02 generates a small output voltage proportional to this flux. Contrary to photodiode-based- and “black and white” instruments LP02 has a spectrally flat response across the full solar spectrum. Using LP02 is easy.
LP02 can be used for general meteorological observations, building physics, climate- and solar collector testing. A common application is for outdoor solar radiation measurements as part of a meteorological station. This application requires horizontal levelling; levelling feet (7) and a level (11) are included. The LP02 cable can easily be installed or replaced by the user.
Applicable standards are ISO 9060 and 9847, WMO (World Meteorological Organisation), and ASTM E824-94. LP02 can also be used for stability estimations according to EPA ( EPA-454/R-99-005).
Options
- Additional cable length x metres (add to 5m)
- Please contact Hukseflux for additional information.