HF05 heat flux sensor

HF05 industrial heat flux sensor
Industrial heat flux sensor

HF05 measures heat flux and surface temperature in industrial environments. The sensor has a fully sealed stainless steel body and a PTFE cable. It can withstand relatively extreme environmental conditions.

Specifications
Measurand
  • heat flux
  • temperature
Measurement range
  • -6000 to 6000 W/m²
Sensitivity (nominal)
  • 15 x 10⁻⁶ V/(W/m²)
Would you like a personalised quote?

or contact us: info@hukseflux.com

Specifications

Measurand
  • heat flux
  • temperature
Measurement range
  • -6000 to 6000 W/m²
Sensitivity (nominal)
  • 15 x 10⁻⁶ V/(W/m²)
Heat flux sensor
  • thermopile
Temperature sensor
  • thermocouple type K
Uncertainty of heat flux calibration
  • ± 10 % (k= 2)
Calibration traceability
  • to SI units
Recommended number of sensors
  • 2 per measurement location
IP protection class
  • IP67
Rated operating temperature range
  • -30 to +170 °C
Standard cable length
  • 3 m
Order code
  • HF05 / cable length in m
Options
  • longer cable (specify total cable length in m)
  • connector at HF05 cable end
  • EC type examination certificate (ATEX) II 2 G EEx d IIC T6
  • extension cable with 2 connectors matching cable connector and chassis connector (specify cable length in m)
  • chassis connector with internal wiring (colour code of wiring identical to cable colour code)
Manuals & Downloads

Description

HF05 industrial heat flux sensor

HF05 industrial heat flux sensor

HF05 measures heat flux through the object on which it is mounted, in W/m², as well as its surface temperature in °C. The sensors in HF05 are a thermopile and a type K thermocouple. A thermopile and a thermocouple are passive sensors; they do not require power. The sensors inside HF05 are protected by a fully sealed stainless steel body.

Typical applications of HF05 are studies of fouling in industrial environments mounted on tubing or on the jacket of reactors. HF05 is also used for performance evaluation of industrial insulation. Using HF05 is easy. It can be connected directly to commonly used data logging systems. The heat flux in W/m² is calculated by dividing the HF05 output, a small voltage, by the sensitivity. The sensitivity is provided with HF05 on its product certificate.

Suggested use

  • industrial heat flux measurements
  • performance evaluation of industrial insulation
HF05 heat flux sensor
HF05 industrial heat flux sensor
  • durable cable with strain relief, pressure and waterproof
  • passive guard area reducing deflection errors
  • high temperature, withstands up to 170 °C Laser welded completely sealed housing
  • practical mounting flanges
  • thermocouple included
Would you like a personalised quote?

or contact us: info@hukseflux.com